Testing

Radio, Telecommunications and IT Testing

Bureau Veritas Electrical offers worldwide radio, telecommunications & IT Equipment testing and approvals management from our laboratories and offices all over the world. We are registered with the FCC and ISO/IEC 17025 accredited via A2LA to provide complete Part 68 telecommunications and certification via our in-house Telecommunications Certification Body (TCB). Canada's Industry Canada has approved Bureau Veritas Electrical for testing to the CS-03 standard for all regulated interface types, both analog and digital. From a PBX containing voice and T1 ports, to primary and basic rate ISDN, down to an analog or DSL modem, Bureau Veritas Electrical has the knowledge, expertise, and equipment to conduct regulatory compliance testing on your product efficiently.

We have developed customized testing for central office type products that are required to comply with network operators requirements. These custom tests often involve research to ascertain the best cost effective route to demonstrate compliance. We regularly test high speed copper and optical interfaces by working in partnership with the customers design team. This testing can be carried out at Bureau Veritas Electrical or at the customer’s location.

With our network of contacts worldwide we can help you with your approvals management requirements.

Our senior employees have been involved in the evolution of telecommunications compliance since the mid-1980s. Our experienced engineers have successfully tested hundreds of telecom products. Bureau Veritas Electrical (ADT, Curtis Straus & LCIE) test reports have successfully been used throughout the world to support customer’s compliance needs.

Radio & Telecoms Test Laboratory Locations

• France
• Taiwan
• USA

Radio & Telecoms Assistance (with ITE test facilities):

• China
• Germany
• Hong Kong
• United Kingdom

Bureau Veritas Electrical can test products to the following world standards, not exhaustive:

• ARIB STD-T66, ARIB STD-T71, RCR STD-33 - WLAN, Bluetooth/Japan Standard
• Australia AS/ACIF S002, 016, 031, 038, 043
• DGT LP0002 - WLAN, SRD devices/Taiwan Standard
• EN 300 220 - RF/25 MHz to 1000 MHz frequency
• EN 300 328 - RF/2.4 GHz ISM band and using spread spectrum modulation techniques
• EN 300 330 - RF/9 kHz to 25 MHz frequency
• EN 300 422 - Wireless Microphone/25 MHz to 3 GHz frequency
• EN 300 440 - RF/1 GHz to 40 GHz frequency
• EN 301 489-1 - EMC common technical requirements for radio equipment
• EN 301 489-17 - EMC/2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
• EN 301 489-24 - EMC/IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment
• EN 301 489-3 - EMC/9 kHz and 40 GHz Short-Range Device
• EN 301 489-7 - EMC/Mobile and portable radio and ancillary equipment of digital cellular radio telecommunication systems
• EN 301 489-9 - EMC/Wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring device
• EN 301 893 - Broadband Radio Access Networks (BRAN);5 GHz high performance RLAN
• European Union ETSI TBR1, TBR2, TBR3, TBR4, TBR12/13, TBR21, TBR24
• FCC Method-47 CFR Part 68, TIA/EIA/IS-968, TIA-968-A - Telephone Terminal Equipment
• FCC Part 15 Subpart C and E, RSS-210 - Intentional Radiators devices, U-NII device
• FCC Part 22/24 - Mobile phone
• FCC Part 68 (including all the ACTA requirements)
• IC CS-03 - Telephone Terminal Equipment, Interface type A, Part I, V, VIII
• IEEE Std 1528-200X, FCC OET Bulletin 65 Supplement C, EN 50360/ EN 50361, RSS-102, ACA Radio Communication Standards – Specific Absorption Rate (SAR) test
• Industry Canada CS-03
• ITU-T Recommendations
• JATE Books
• PLMN01, EN301511, IDA TS GSM 900&1800 , HKTA 1033 , ACA TS018 - GSM/DCS1800 Mobile Terminal Equipment
• PSTN01 - Telecommunication Terminal Equipment
• Wi-Fi - Wi-Fi (Wireless Fidelity) IEEE 802.11a, 802.11b, 802.11g, WMM, WPA2, 802.11h+d